Hebei Long Zhuo Trade Co., Ltd.
Model No.: CF915-MA
Cooling Method: Cross Flow
Ventilation Mode: Natural Ventilation
Material: Concrete, PVC,PP
Air Contact Form: Wet and Dry
Air Contact Way: Open
Tower Shape: Square
Noise Level: Ordinary
Application Fields: Industrial
Product Name: Marley 915mm Cooling Tower Fill Media
Length: As Your Request
Application: Cooling Tower
Packaging: cooling tower fill be packed by wooden case or pallet
915MM PVC Fill Pack For Marley Cooling Tower
Cooling towers reject heat from water-cooled systems to the atmosphere. Hot water from the system enters the cooling tower
and is distributed over the fill (heat transfer surface). Air is induced or forced through the fill, causing a small portion of the water to evaporate. This evaporation removes heat from the remaining water, which is collected in the cold water basin and returned
to the system to absorb more heat. Each cooling tower line, although operating under the same basic principle of operation, is arranged a little differently.
There are two main configurations of factory assembled cooling towers: crossflow and counterflow. In crossflow cooling towers, the water flows vertically down the fill as air flows horizontally across. In counterflow cooling towers, the water flows vertically down the fill as air flows vertically up.
Length: As your request.
2. Thickness: 0.2~0.4mm.
3. Applicable Temperature: 65°C~-35°C.
4. Color: Black, grey
5. Shaping mode: Compression molding.
6. Mixnum order quantity:1000pcs.
7. Packaging: In bundle,wooden pallet or as your request
8. Features: High cooling efficiency; Small resistance; Large packing vent; Long service time
Marley Cooling Tower Fill Introduction
1.MX Fill is available in MX75 configuration and higherperforming MX625 configuration. MX is a hanging film type
cooling tower fill which spreads the water into a thin film, flowing over large vertical surfaces, promoting maximum
exposure to air flow. This type of fill provides much more water surface exposure per cubic foot than splash type fill.
2.MX fill incorporates highly efficient cellular drift eliminators, integrally molded within the fill sheets. Compared with
previous designs, these eliminators reduce drift emissions from the tower by a factor of ten or more! Less drift means
tower owners save water bills and water treatment chemical expenses.
3.This fill virtually eliminates the nuisance caused by drift spotting on adjacent buildings and property. For additional savings
, the drift eliminators discharge air directly toward the fan. Discharge air, traveling in the right direction when it leaves the
eliminators, translates to lower fan horsepower.
4.Louvers are also integrally molded within the fill sheets preventing water from escaping and assuring precise air
distribution throughout wide variations in airflow. Unlike towers equipped with separate external louvers, this fill operates
virtually ice-free even in extremely cold weather.
5.MX fill is thermoformed from PVC with a flame spread rating less than 25 per ASTM E84 and is considered selfextinguishing.
Therefore, the risk of fire damage is minimal.
Packing:Cooling tower fill be packed by PE belt+wodden pallet or Woddern crate.
Copyright © 2019 Hebei Long Zhuo Trade Co., Ltd. All rights reserved.